Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2007
    Location
    jersey channel islands
    Posts
    187
    Rep Power
    19

    mitsubushi city bc box repair



    hi people .
    just wanted to ask if any one had brazed inside a bc controller box .
    our tech man told me the whole box would have to come down . dismantle it , braze in the new part .
    and the re braze all the pipework connected to it .
    i wondered if it was possible to support the pipe work to the box and the pipework to the indoor units , remove the casing and do the repair and the after a pressure test .
    re assemble the casing .
    or am i barking up the wrong tree?
    your input would be welcomed , cheers in advance .



  2. #2
    Join Date
    Nov 2008
    Location
    scunny!
    Age
    35
    Posts
    302
    Rep Power
    22

    Re: mitsubushi city bc box repair

    Your best bet is to take it down there a pain in the ass to do any repair to

  3. #3
    Join Date
    Feb 2015
    Location
    UK
    Posts
    30
    Rep Power
    0

    Re: mitsubushi city bc box repair

    Hell of a lot easier to drop it down, better get it repaired right the first time. They are pretty tight inside!

  4. #4
    Join Date
    Oct 2014
    Location
    Ireland
    Age
    33
    Posts
    43
    Rep Power
    0

    Re: mitsubushi city bc box repair

    What part are you replacing?

  5. #5
    Join Date
    Oct 2007
    Location
    jersey channel islands
    Posts
    187
    Rep Power
    19

    Re: mitsubushi city bc box repair

    i am not doing the job .
    and was working on another system one floor above.
    sadly not enlightened into how they went about it .
    but know if i want a correct answer to a problem .
    i will get it here .
    cheeers for your help folks .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •