Results 1 to 3 of 3
Thread: Re: Compressor question 2
Hybrid View
-
19-02-2015, 01:03 PM #1
Re: Compressor question 2
Hi guys...I am new to the forum. I am a research scholar from India. I need some clarification regarding hermetic reciprocating compressor functioning. I want to know where the refrigerant mixes with the lubricating oil in the compressor also how much quantity gets mixed in the compressor. I searched the literature available but i didn't find any. If anyone is good at this please help me by providing the information. I will be delighted to see refrigerant flow circuit inside the compressor. I hope the engineers working in this area will give me valuable information. Eagerly waiting for the reply. Thank you.
-
19-02-2015, 02:02 PM #2
Re: Compressor question 2
Hi, koppula
Welcome to RE forums ...
I rename and move your post into new thread ... it is not nice to "hijack" into someone's thread, agree ...
You should start your first post here: http://www.refrigeration-engineer.co...p?72-New-to-RE
To introduce yourself, but you did it in this way ....
I hope some of valuable members will answer to you (be patient) meanwhile you can search forums and for sure you'll find something very interesting.
Regarding hermetic compressors you can start here too:
http://www.danfoss.com/Pacific/Busin...onAndTraining/
http://www.danfoss.com/Pacific/Busin...ng/RA+Home.htm
Hope this will be of some help to you
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
20-02-2015, 11:21 AM #3
Re: Compressor question 2
Thank you Josip.....