Results 1 to 2 of 2
-
30-01-2015, 10:17 AM #1
Multiplexing RS 232 signals and RS485 signals for BMS
Hi Amigos,
I am new to this forum & i need ur much appreciated help for BMS connection .
How to check if my RS232 to RS485 converter is converting the signal and working .Last edited by Kalidas.dor4; 13-02-2015 at 08:59 AM.
-
05-06-2015, 02:55 AM #2
Re: Multiplexing RS 232 signals and RS485 signals for BMS
Hi.
to check the RS485 / 232 working,
use the converter with LED..from this LED you can see it communicating.
w.l.ong