Results 1 to 6 of 6
Thread: Danfoss Service Tool software.
-
03-01-2015, 09:48 AM #1
Danfoss Service Tool software.
Hi Guys!
Does anyone know if the above is still available?
Also if so what's a rough idea of cost?
ref AK-ST 500 ?
Thanks GrizzlyLast edited by Grizzly; 03-01-2015 at 10:12 AM.
-
03-01-2015, 11:12 AM #2
Re: Danfoss Service Tool software.
That's what I've got from danfoss,
http://industrialrefrigeration.danfo...ampaign=IR-web
-
03-01-2015, 11:19 AM #3
Re: Danfoss Service Tool software.
Hi Grizz
ST 500 is the current software for the Danfoss AK controllers . You need to buy the disc which costs about £250.00 depends which wholesaler you buy from so check before you buy . Once to have the disc any updates you can download from Danfoss.co. uk free of charge . you also need a special cable and USB adaptor to connect to the controller. AK-ST 500 Software code no 080Z0161 and the cable is AK-USB Code No 080Z0262 if you need any help mail me Glenn
-
03-01-2015, 04:52 PM #4
Re: Danfoss Service Tool software.
Thanks for the input Glenn.
I believe I already have the special cable and adaptor and was asking about the software only really.
However at that cost there is no way my company will pay that for it, so I guess unless I paid for it myself.
I am going no-where fast.
A bit pricey for my pocket sadly!
But thanks for the Heads up and Chemi thanks for your efforts also.
cheers Guys, Grizzly
-
03-01-2015, 07:09 PM #5
Re: Danfoss Service Tool software.
Hi Grizzly
Which controller do you need it for as I have a no of early software versions where do I send it
-
04-01-2015, 06:13 AM #6
Re: Danfoss Service Tool software.
Hi Glenn.
Thanks for the offer of assistance.
I have PM'd you with the details.
Grizzly