Carrier Genesis R 70 trouble (video)

[beida]

Hi
Best wishes for a happy New Year Brother
I have a truck Carrier Genesis R 70
The engine is running a little bit and then stops and issued a strong noise and a lot of black smoke But I note that the clutch works at the beginning ? Is not normal
There are no alarm in the Control Box !!
We have examined the battery and all Relay and fusible
I have checked the compressor and the engine manually, there is no problem everything spins running smoothly
This video

[Brian_UK]

Looks like belt slip to me.

[beida]

Yup Mr Brian
But in the normal state the engine is running first and then after 7 or 10 seconds and then works to clutch spins the compressor and alternator
Here are the opposite
Engine starts overload !!
Sorry about my bad English

[cadwaladr]

Fuel filter there is one in the pump near tank,one near the engine try starting it on a heat cycle adjust temperature to +20

[beida]

Hi #cadwaladr
I will try him tomorrow
Thanks brother
I will tell the results

[cadwaladr]

Ok the engine does not like too much load,but it should start unloaded take care friend

[beida]

Fuel filter there is one in the pump near tank,one near the engine try starting it on a heat cycle adjust temperature to +20

Hi Mr #cadwaladr

I change fuel filters
But still when you started running
Just the noise and black smoke and then stop !!

[cadwaladr]

Try taking the belt off to compressor and see if it will run be careful only do this for a short time or engine will overheat

[beida]

Try taking the belt off to compressor and see if it will run be careful only do this for a short time or engine will overheat

Thenx brother #cadwaladr
I after remplacing feul filter and clean pump feul filter the ingine want to start normal but now i have Air in feul seystem how I can remove it ?

[cadwaladr]

There is a bleed screw on the injection pump on the side of it think it's a 12mm spanner size,it should bleed itself thru the return line

[beida]

There is a bleed screw on the injection pump on the side of it think it's a 12mm spanner size,it should bleed itself thru the return line

Thenx To important information
god Bless you Brother

[cadwaladr]

Glad to help take care because I care.

[Barberboyy]

Sounds like the injector pump or injectors mate

[cadwaladr]

I think he has it sorted fixed now?

[beida]

Yeh
#Cadwalar thnx bro
Evrything work now
It's done

[cadwaladr]

Great to know,thanks for getting back to us one day I may visit your country and look you up take care.