Results 1 to 3 of 3
  1. #1
    Join Date
    May 2006
    Location
    Sussex
    Posts
    364
    Rep Power
    20

    Big Hall...... Wall-Mounts or Chilled Beam



    I just wondered if anyone had any experience with aircon to a large hall.

    I have been talking to a customer about installing 6 wall-mounted room units (10kW) to serve the hall which is 25x17x6m high. There is some existing vent ducting with gas heater, so this is just for the summer load.

    With heating one would tend to go for a radiant heating system in this kind of scenario, and for cooling one might be thinking of a chilled beam (yes/no?). Has anyone had experience installing chilled beams in this kind of hall?



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: Big Hall...... Wall-Mounts or Chilled Beam

    Can a dx coil be installed into the ductwork? Or a chilled water coil...
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    May 2006
    Location
    Sussex
    Posts
    364
    Rep Power
    20

    Re: Big Hall...... Wall-Mounts or Chilled Beam

    I took a brief look at that idea but it seemed unreal due to the tight plant install in room beside the hall.
    I will have another look at this when I go there again and see if some clever ideas might solve that scheme.

    In the hall, they can't hang anything from the roof, which means everything has to go on the perimeter (where the ducting is). Even chilled beam/s would be tricky with those restrictions, I guess.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •