Results 1 to 2 of 2
-
05-12-2014, 08:43 AM #1
Problem board i/o digital Mypro Cp3
Hi, I have a problem with a cp3 MyPro, the case is receiving digital signals plc, to put it into operation, and the LEDs for digital inputs light, but MyPro not trigger any digital output, the parameters are correct, as in the other 2 compressors in the same center, this remote, I even canviado full motherboard, the communication cable card with digital inputs and outputs, card and digital inputs and outputs, and nothing remains the same .
Any ideas?
Thank you
-
27-12-2014, 02:55 PM #2
Re: Problem board i/o digital Mypro Cp3
Solucionado. Ok