Results 1 to 3 of 3
Thread: need some help about DIRcalc
-
02-11-2014, 03:12 PM #1
need some help about DIRcalc
Hello every one:
i have a little problem when using DIRcalc software , so can someone help me about the "line multiplier" , what does it mean.
thanks ;-)
-
03-11-2014, 02:26 PM #2
Re: need some help about DIRcalc
Hi, MELO77
welcome to RE forums .... first post usually would be here ...
http://www.refrigeration-engineer.co...p?72-New-to-RE
to introduce yourself to us ... but you can do it later ...
... open your Dircalc program and then put your cursor over Line multiplier number ... now is 1,00 ...when number background became yellow click the right mouse button ... then you can read explanation ...
Hope this will be of some help to you...
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
04-11-2014, 03:03 PM #3
Re: need some help about DIRcalc
Hi Josip :
thank's a lot for this valuable help .
Best regards , MELO77