Results 1 to 7 of 7
-
15-04-2006, 05:18 PM #1
Procedure For Selection Of Capillry Tube
wHAT IS THE PROCEDURE TO SELECT THE CAPILLRY TUBE OF ACCURATE SIZE.
THANKS
-
15-04-2006, 05:48 PM #2
Re: Procedure For Selection Of Capillry Tube
Hi, AMARNATH,
http://www.supco.com/images/20%20cap%20tubing.pdf
This was addressed in a different thread. You can search for key words and perhaps you could have found it yourself. Try searching the forum. I think there are other answers already posted to your question that may be more helpful. I just searched "capillary tube."Last edited by Brian_UK; 17-04-2006 at 10:55 PM. Reason: Link address
-
16-04-2006, 02:20 AM #3
Re: Procedure For Selection Of Capillry Tube
Hey have a look at this thread from this very site.
http://www.refrigeration-engineer.co...ead.php?t=3800The primary function of the design engineer is to make things difficult for the fabricator and impossible for the serviceman.
-
16-04-2006, 10:51 AM #4
Re: Procedure For Selection Of Capillry Tube
Som pdf's to help you further
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
17-04-2006, 04:59 PM #5
Re: Procedure For Selection Of Capillry Tube
Originally Posted by Peter_1
Thanks a lot peter_1
If you have some more information please send to me
-
02-05-2006, 05:34 AM #6
Re: 50hz and 60 hz
we have installed water chiller, euiropean designed, we convert it to 60 hertz, we change the pump and the primary transformer, my question is ? what is the effect in refregiration system of the water chilller,,
i hope someone can give an idea on this .
thanks nico
-
26-06-2006, 04:57 AM #7
Re: 50hz and 60 hz
My opinion: not much of a change. a) you will change slightly the capacity in TR (change in COP); b) change in energy consumption; c) may need to check loss in kw (because of cos(phi)
If there is anything else please let me know.
Fastco
Similar Threads
-
oxidation scale in copper tube and fittings
By DeB in forum FundamentalsReplies: 8Last Post: 23-06-2006, 09:45 PM -
metric capillary tube
By tralex in forum FundamentalsReplies: 5Last Post: 21-02-2006, 07:57 AM -
The amazing Mr. Cap Tube
By shogun7 in forum DomesticReplies: 52Last Post: 07-01-2006, 08:33 PM -
Calculate cap tube
By herefishy in forum Technical DiscussionsReplies: 55Last Post: 04-11-2003, 09:31 PM -
Tube staggered/squared
By bersaga in forum FundamentalsReplies: 2Last Post: 06-01-2003, 12:56 AM