Looking for Trane SMM "factory" service manual (F and G menu)

[Emmanuel78]

Hello,

My story : I replaced a broken SMM module on a ECGAH240 unit with a spare unit, which is unfortunately "blank".

I managed to access the F and G "factory" menu with passwords found here (Thanks AlexG) : 42587 51082

But I need help on the G menu items : there are about 15 parameters to set, but I have no manual that explains these parameters...

Could someone help ?

Regards,

Emmanuel

[CV_Geardrive]

Hi, check your email.

[j imbo]

Hi, check your email.

Hi, I am also in need of the f and g menu information. Is there a link to a download you could post please?

[Meatball]

Hi, I am after this information also for the 'f' and 'g' factory parameters, can you help with this?
Cheers

[Grizzly]

Hi, I am after this information also for the 'f' and 'g' factory parameters, can you help with this?
Cheers

Hi Meatball, maybe the attached will help?
It's not complete but it's the best I can do!
The response is then for you to help others on the forum when you can!
To many lately are asking for help and when they get it are never to be seen again.
Grizzly

[Meatball]

Thanks a lot Grizzly, i will do my best to help others.
Cheers

[Meatball]

Thanks a lot Grizzly, i will do my best to help others.
Cheers