Results 1 to 3 of 3
-
17-09-2014, 09:37 AM #1
Registered User
Hey, I am new to : RE
- Join Date
- Oct 2010
- Location
- taiwna
- Age
- 53
- Posts
- 5
- Rep Power
- 0
Pls provide Stal S83 & S26 swept volume
Hi brothers,
Would you kindly provide Stal S83 & S26 swept volume .
Both motor's spec are 3 phase 380V 60HZ, compressors max speed are 4000 rpm .
Thanks a lot！
Best regards
-
17-09-2014, 04:10 PM #2
Moderator
Site Moderator : and general nice guy
- Join Date
- Jan 2006
- Location
- Croatia
- Age
- 68
- Posts
- 2,263
- Rep Power
- 31
Re: Pls provide Stal S83 & S26 swept volume
Hi, Jeter Lin
STAL-MIMI MkII - S26
Originally Posted by Jeter Lin
at 50 Hz 700 m3/h max shaft input power 250 kW
at 60 Hz 840 m3/h max shaft input power 300 kW
Hope this will be of some help to you.
I believe if you search RE forums you can find some capacity data regarding STAL S-83
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
18-09-2014, 12:57 AM #3
Registered User
Hey, I am new to : RE
- Join Date
- Oct 2010
- Location
- taiwna
- Age
- 53
- Posts
- 5
- Rep Power
- 0
Re: Pls provide Stal S83 & S26 swept volume
Originally Posted by Josip
Hi, Jeter Lin
STAL-MIMI MkII - S26
at 50 Hz 700 m3/h max shaft input power 250 kW
at 60 Hz 840 m3/h max shaft input power 300 kW
Hope this will be of some help to you.
I believe if you search RE forums you can find some capacity data regarding STAL S-83
Best regards, Josip
Dear Josip
I'm so deeply apprciated your kindness.
Thanks your help again.
Best regards
Jeter
