Results 1 to 16 of 16

Threaded View

  1. 11-04-2006, 04:27 AM #1
    fridg's Avatar
    fridg
    fridg is offline regular poster
    Join Date
    Nov 2005
    Location
    australia
    Posts
    152
    Rep Power
    19

    Question Problem with freezer fan.

    I am looking at a upright freezer for a mate.
    it is a Westinghouse 380 L frost free.

    It is cooling at the bottom where the evap is , but as it has a duct in the back with a JRM fam motor , to distribute cold air from evap to top of freezer.



    This fan does not run has 240 V in and 240 V out
    there is a red alarm light on the front indicating an alarm has gone off.

    For this freezer to defrost , i think it works on a klixon.

    What could be the causes for the fan not to run.
    Last edited by fridg; 12-04-2006 at 04:01 AM.
    The primary function of the design engineer is to make things difficult for the fabricator and impossible for the serviceman.
« Previous Thread | Next Thread »

Similar Threads

  1. Blast freezer temperature problem. Please help!!!
    By volta in forum Technical Discussions
    Replies: 13
    Last Post: 10-05-2010, 04:54 AM
  2. Strange problem
    By Peter_1 in forum Electrical
    Replies: 9
    Last Post: 10-04-2007, 05:19 PM
  3. please help with Kenmore Upright Freezer
    By lrn376 in forum Trouble Shooting
    Replies: 0
    Last Post: 09-07-2006, 10:40 PM
  4. Condensation Problem At Door to Freezers
    By mmarch in forum Air Conditioning
    Replies: 5
    Last Post: 17-10-2005, 02:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules