Results 1 to 7 of 7
Thread: Revco UxF
-
17-08-2014, 08:46 AM #1
VIP Poster
- Join Date
- Oct 2008
- Location
- newbury
- Posts
- 1,444
- Rep Power
- 37
Revco UxF
anyone know about these freezers.?
-
17-08-2014, 11:10 AM #2
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Oct 2007
- Location
- manchester
- Age
- 50
- Posts
- 5,639
- Rep Power
- 45
Re: Revco UxF
-
17-08-2014, 11:14 AM #3
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Oct 2007
- Location
- manchester
- Age
- 50
- Posts
- 5,639
- Rep Power
- 45
Re: Revco UxF
-
17-08-2014, 04:09 PM #4
VIP Poster
- Join Date
- Oct 2008
- Location
- newbury
- Posts
- 1,444
- Rep Power
- 37
Re: Revco UxF
trying to find refrigerant and weight...
Originally Posted by install monkey
-
01-10-2014, 05:57 PM #5
Moderator
Site Moderator : and general nice guy
- Join Date
- Oct 2003
- Location
- Belgium
- Age
- 62
- Posts
- 5,630
- Rep Power
- 34
Re: Revco UxF
Richard, is this still an actual problem you have?
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
01-10-2014, 06:28 PM #6
VIP Poster
- Join Date
- Oct 2008
- Location
- newbury
- Posts
- 1,444
- Rep Power
- 37
Re: Revco UxF
Originally Posted by Peter_1
not any longer
I passed it over to a ULT specialist as I needed 300gms but the refrigerant was only available in 8kg bottles and at over 200 Euro's per Kg it became not cost effective. Not sure what happened after that.
-
01-10-2014, 08:23 PM #7
Moderator
Site Moderator : and general nice guy
- Join Date
- Oct 2003
- Location
- Belgium
- Age
- 62
- Posts
- 5,630
- Rep Power
- 34
Re: Revco UxF
It's normally R508 for the newer units and R23 for the older ones.
You mostly can fill it at a standstill temperature of 20°C to a certain equilibrium pressure.
It's sometimes on the nameplateIt's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
