Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2010
    Location
    usa
    Posts
    13
    Rep Power
    0

    Smile Shinco KFR-50GWZ/BM error code 6 need help please



    where can I find a pipe sensor and a air sensor for this thing to fix error code 6 or can I jump or bypass the sensors to see if this board is bad and where can I buy a new board gt world does not answer there calls or messages please help



  2. #2
    Join Date
    Aug 2010
    Location
    usa
    Posts
    13
    Rep Power
    0

    Re: Shinco KFR-50GWZ/BM error code 6 need help please

    ok pulled pipe sensor got a bad reading so I ordered a 15k I guess that's what one I need on the slow boat from china ...ps put the ac in charge mode to see if it would run and it did .found out that those temp sensor are read at 0 c to find out the k reading is thanks wiki ... cross my fingers to see if that fixes my e06

  3. #3
    Join Date
    Aug 2010
    Location
    usa
    Posts
    13
    Rep Power
    0

    Re: Shinco KFR-50GWZ/BM error code 6 need help please

    well Its running blows cold air I got a 15k from reading this R(0)=15Ką2% ;B(0/100)=3450Ką2% R-T hope its the right one

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •