Mini clamp meter

[Anz]

image.jpgimage.jpgAlrite lads,

I'm after a mini / slim jaw clamp meter mainly for splits, the 1 I've got is too big to get run amps off fans and comps without snipping the outer sheath off the cables.

I've seen this martindale mini clamp that seems ok and a kewtech or the other name it has with really thin jaws.

Any1 use similar?


Cheers andy

[install monkey]

dont buy the isotech 1 rs do with the detatchable head- peice of ****e!- got a milwaukee off ebay for a ton which does ac dc current,capacitor tester and hertz, jaws are ok, except for panasonic urbans with the terminals on the rh side

[The Viking]

Just read the spec and make sure it works on square waves and varied frequencies as generated by inverters.

Most small, cheap, clamp meters only give accurate readings at 50Hz sine wave.

[PRESS]

http://www.fluke.com/fluke/auen/prod...amp-meters.htm

Check the ones on the link.

[kefah]

here in Iraq
the Kyoritsu is very good but Fluke is better