Results 1 to 2 of 2
  1. 24-07-2014, 03:52 AM #1
    hagget's Avatar
    hagget
    hagget is offline Registered User Hey, I am new to : RE
    Join Date
    Jul 2014
    Location
    Australia
    Posts
    1
    Rep Power
    0

    Smile Samsung remote fault codes



    Hi guys, could anybody tell me how to bring up a fault code on my remote? It is for an AQV09NSBN 2.5kw split aircon.
    It has refrigerant but the compressor isnt starting, indoor and outdoor fans are operating.

    Thanks Hagget


  2. 24-07-2014, 11:02 AM #2
    The Viking's Avatar
    The Viking
    The Viking is offline VIP Poster I am starting to push the Mods: of RE
    Join Date
    Feb 2007
    Location
    UK
    Posts
    2,473
    Rep Power
    45

    Re: Samsung remote fault codes

    Hi Hagget,

    If it got a fault on it the code will be the only thing you see on the remote, assuming you got a wired remote.
    If you got the Infra Red remote then the lights flashing on the facia of the indoor unit is your fault code.

    Taking a step back, have you checked that the unit either is set to cooling with a setpoint below the room temperature or heating with a setpoint above room temp?


    [EDIT]
    Just re-read your post, the outdoor fan is running but not the compressor?
    OK, time to call a proffessional in. Sorry.
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules