Results 1 to 1 of 1
Thread: O General Vs York Vs Others
-
19-07-2010, 09:16 AM #1
O General Vs York Vs Others
We have just been given a job to install ducted units to cover a warehouse that has an area of approximately 2000 sq ft.They previously had 2 5ton York machines but the compressors on these units dont seem to be handling our +50 degrees of outdoor heat quite well and started leaking or conking off.
Especially with regards to outdoor conditions any recommendations on what brands are recommended for the region and this job?
Similar Threads
-
HelpNeed York chiller literature!
By matrix1004 in forum IndustrialReplies: 8Last Post: 09-12-2010, 09:36 PM -
York YS chiller water connections left vs right hand config
By Pete S in forum CommercialReplies: 1Last Post: 17-06-2010, 06:54 PM -
York Screw Model YCASO330
By James K. Donell in forum Technical SpeculationsReplies: 1Last Post: 12-06-2010, 11:24 PM -
Best place to get York Chiller parts
By richard55 in forum IndustrialReplies: 1Last Post: 21-09-2009, 10:12 AM -
York Recip NH3 Compressor Info
By CIR391 in forum Industrial CompressorsReplies: 1Last Post: 05-05-2009, 11:51 AM