Results 1 to 5 of 5
Thread: Lae smd34
-
19-10-2009, 07:22 PM #1
Lae smd34
hI GUYS, WAS WANDERING DOES ANYONE KNOW HOW TO TAKE THE CLEAN OF THE THE DISPLAY, MANY THANKS FOR ANY HELP WITH THIS
-
19-10-2009, 10:51 PM #2
Re: Lae smd34
Sorry, I don't understand your question.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
19-10-2009, 10:55 PM #3
Re: Lae smd34
the contoller is displaying CLN when turned on, I presume this is a Clean Cond Alarm, sorry for the confusion Brian
-
19-10-2009, 11:32 PM #4
Re: Lae smd34
That's OK, not a problem, just me being dense
Anyway,,,, download the instructions for the SSD90 controller that is feeding your SMD34 display from the link below.
Find paragraph 8.3 which is about your alarm and somewhere else in there you will find how to reset it.
http://www.hawco.co.uk/UserFiles/Pro...version-22.pdfBrian - Newton Abbot, Devon, UK
Retired March 2015
-
20-10-2009, 07:43 AM #5
Re: Lae smd34
Thanks alot Brian, will check out the link now.