Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2014
    Location
    Finland
    Age
    44
    Posts
    3
    Rep Power
    0

    Exclamation 30GX 20IH00100.zip SCPM replacement error 36



    Hi,

    I am replacing SCPM module for 30GX115, old one was defective (sparks, burned circuit board).
    I received 5001-SCPM-A2 kit, but instructions said i need to program card with PD5 SCPM REPLACEMENT software which was not included in SCPM replacement kit

    We have tried to look from emea but no go. Old computers have been looked through, no go.

    With PD4 SCPM (scpm3040.cmd) software downloaded in to the card, machine gives me 3 errors (load solenoid, oil solenoid, compressor contactor, alm_1 = 36 communication eroor PSIO), when i mess up the SCPM address by dip switches, i have 5 errors so i think connection between PSIO and SCPM works fine, but i think i should not waste anymore time without software mentioned in manual.

    Where i could get 20IH00100.ZIP (PD5 SCPM REPLACEMENT) ?
    Any other option to get it work?



  2. #2
    Join Date
    Apr 2009
    Location
    israel
    Age
    50
    Posts
    778
    Rep Power
    18

    Re: 30GX 20IH00100.zip SCPM replacement error 36

    Hi
    carrier only
    good luck
    THE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!

  3. #3
    Join Date
    Jun 2006
    Location
    South Coast
    Posts
    278
    Rep Power
    23

    Re: 30GX 20IH00100.zip SCPM replacement error 36

    You will have to ring your local Carrier Service Office and get them to download it.

  4. #4
    Join Date
    Jun 2009
    Location
    North East England
    Age
    41
    Posts
    714
    Rep Power
    19

    Re: 30GX 20IH00100.zip SCPM replacement error 36

    Quote Originally Posted by Gibbo View Post
    You will have to ring your local Carrier Service Office and get them to download it.
    I thought there was now an option to order a pre loaded SCPM, at an inflated cost of course

  5. #5
    Join Date
    Jun 2006
    Location
    South Coast
    Posts
    278
    Rep Power
    23

    Re: 30GX 20IH00100.zip SCPM replacement error 36

    Surely not inflated.


  6. #6
    Join Date
    Jun 2009
    Location
    North East England
    Age
    41
    Posts
    714
    Rep Power
    19

    Re: 30GX 20IH00100.zip SCPM replacement error 36

    Quote Originally Posted by Gibbo View Post
    Surely not inflated.

    surley not!!!!! LMAO

  7. #7
    Join Date
    Jan 2011
    Location
    London
    Age
    38
    Posts
    43
    Rep Power
    0

    Re: 30GX 20IH00100.zip SCPM replacement error 36

    hi juniku

    when replacing the scpm moduale it needs to be programed by a carrier engineer due to the ccn modbus some times if u give them the modal and serail of the chiller and the software version they can upload the software to the board and send it to you.in your case you need to contact carrier

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •