Results 1 to 5 of 5
Thread: RSIR compressors
-
03-06-2014, 10:24 AM #1
RSIR compressors
Hi all,
Just a quick brain pick.
Noticed a few chinese cabinets with "embraco" or "tecumseh" comps, which after a few weeks operation are having starting issues.
These are all 1/3 to 1/4 hp comps with RSIR start gear. Was wondering what issues i may find if I replaced start gear to CSIR.
At present the anti short cycle delay of 5 minutes I usually set helps, but even still - these are commercial use cabinets.
Any thoughts?????????
-
03-06-2014, 11:11 AM #2
Re: RSIR compressors
Sounds like the compressors are undersized for the job,matey!!!
-
03-06-2014, 07:20 PM #3
Re: RSIR compressors
http://www.embraco.com/desktopmodule...vos/mp01eg.pdf
bit of literature
-
03-06-2014, 07:44 PM #4
Re: RSIR compressors
just love the joy of dealing with cheap chinese crap.
only 250 screws to access the evap.
Cabinets perform ok when pulling down, just cant handle starting again.
-
04-06-2014, 07:37 AM #5
Re: RSIR compressors
Have noted difference between embraco RSIR and CSIR comps is different start winding resistances.
Eg: R134a 8cc RSIR has a winding of 42ohm the same size comp but CSIR has a start winding of 30ohm.
Anyone ever tried to fit the gear off a CSIR comp to a RSIR comp and had it last more than 5 minutes????
Might be a little project.....