Results 1 to 3 of 3
-
20-05-2014, 02:51 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- Oct 2012
- Location
- SINGAPORE
- Posts
- 4
- Rep Power
- 0
DX system using Deliver Tempreture Sensor control
Hi all,
I like to find out is it possible using DeliverTempreture sensor (before using return air control)
to control set point for DX system at Data server room.
I am using Unifliar model TD2242 /4 compressor 2 system air-cooled. set 25'C 50%rh
Thank
-
20-05-2014, 08:36 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: DX system using Deliver Tempreture Sensor control
It is better to use the return air sensor or even a room sensor.
If you use a supply (delivery) sensor the the temperature control will be poor due to the fast changes in supply temperature.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
20-05-2014, 11:28 PM #3
Registered User
Hey, I am new to : RE
- Join Date
- Oct 2012
- Location
- SINGAPORE
- Posts
- 4
- Rep Power
- 0
Re: DX system using Deliver Tempreture Sensor control
Thank. I will explain to my end user
