Dirty evaporator

[beida]

Hi Brother
I have a chilled water 41 000 kcal/h to cool the plastic injection machine
I bought it about a year ago from Turkey
There is a problem dirtying the water as in the picture _ water Filter _
from first day its work with distilled water but its keep make dirty
now i make one filter water in the outlet evaporator to protect my Machine i change it every 3 day !!
its a lot of Dirty -_-
operating temperature 10 Celsius
Help me
How do I clean the evaporator?
How to open it for cleaning?
Is the Shell and tube evaporator WTK - italy

Picture
http://im46.gulfup.com/yNqw9p.jpg
http://im46.gulfup.com/Dd4Res.jpg

[Magoo]

You need water treatment to control corrosion and PH control.

[yorkman_gr]

Hi
Maybe a good solution are the following:
1) Install a buffer tank, and the inlet water to evaporator let it come from the upper side of the buffer , so you will give a time for all this dirt to drop down to the bottom of the tank.
2) Make it primary- secondary system using also a buffer tank with internal heat exchanger
Best of luck

[beida]

You need water treatment to control corrosion and PH control.

Hi Bro ^__________^
I have water treatment Station
But before Us It Water And Control PH
How I can Clean The Chiller
Chemical Cleaner ? Acid Sulfate ?
Or
open The Shell And Tube To Clean it
And How Clean Shell And tube DX And How Open
Any Document ?
Its First Time Us The Shell And tube
anyway thenk you For help

[beida]

Yeah Bro
Its Good Idea
But if i can Open The Evaporator To Clean it
All The Other Pipe And Machine Block Pipe and tank Its Clean Now All The Dirty in Evaporator Becoz i Make On Filter In outlet Of Evaporator For Keep Another Pipe And System Cooling Clean
Now All the Dirty In The Evaporator
I Need Some InFormation In HOW I CAN OPEN EVAPORATOR SHELL AND TUBE AND HOW CLEAN IT

[RANGER1]

Beida,
Correct me if wrong, but assume you have a closed circuit cooling water system with some kind of small open top up tank for it.
If you have access to a water treatment company or similar, give them a dirty filter &water sample.
unlikely dirt but bacterial growth in water (wear gloves to you
know what it is).
Then they may suggest flush system with fresh water then add suitable chemicals to kill it & prevent it reoccurring.
To clean outside of tube bundle may be difficult, but first remove insulation off refrigerant in/out end to see if bundle can be removed from shell, so we can at least see what's next.

[beida]

Ranger
Yeah Bro
Yes it is true that he closed water cooling system
Here are no laboratories for the analysis of water and bacteria
But the reason is not the growth of bacteria
the reason of Dirty is the plumber man connect the pipes they contain dirty rusty iron
I will try to open the evaporator to clean it
Thanks for the help

[c.economides]

yorkman_gr, can you please send me a phone number where I can contact you or an e-mail address, since I would like your advice on an issue and I can't seem to send private messages through the forum.

[install monkey]

click on yorkman_gr's page and then " about me" and then "download vcard" his e mail address will be on there- private messaging is enbled after 10 or 25 posts/comments on different threads

[r.bartlett]

http://www.hydratech.co.uk/uk/products/purachem-hsc1/30

[nike123]

For removing rust, you could use Phosporic acid!