Results 1 to 12 of 12
Thread: MHI split popping fuse
Threaded View
-
20-04-2014, 11:04 AM #1
MHI split popping fuse
Hello,
Got a split that was dead when I got to do the maintenance on it.
Fuse spur had power in but the 13amp fuse had gone.
Replaced the fuse ran up n pot tried to kick in then popped the fuse in the spur again.
Checked the pot with my multi meter n seems ok.
The klixon looked charred n melted a bit, had continuity on both pins.
Reckon I need to borrow that Megger again?
Any thoughts?
Also my sniffer picked up a leak n traces of oil on the flares
Cheers