Results 1 to 4 of 4
Thread: Hitachi two units one remote
-
31-03-2014, 05:36 PM #1
improving poster
- Join Date
- May 2010
- Location
- portugal
- Age
- 44
- Posts
- 29
- Rep Power
- 0
Hitachi two units one remote
Hello guys,
Does anyone knows if it's possible to control two inside conduct rpi units from hitachi only using one wired remote without using h-link?
The idea here is to use the two units as one
Kr,
Patricio
-
31-03-2014, 07:03 PM #2
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Oct 2007
- Location
- manchester
- Age
- 50
- Posts
- 5,639
- Rep Power
- 45
Re: Hitachi two units one remote
doubt it, always bought the link wire
-
31-03-2014, 07:06 PM #3
improving poster
- Join Date
- May 2010
- Location
- portugal
- Age
- 44
- Posts
- 29
- Rep Power
- 0
Re: Hitachi two units one remote
By link wire you mean h-link?
Originally Posted by install monkey
-
31-03-2014, 07:23 PM #4
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Oct 2007
- Location
- manchester
- Age
- 50
- Posts
- 5,639
- Rep Power
- 45
Re: Hitachi two units one remote
yep the 3 wire lead that connects between indoor pcbs- 1 end on blue plug, 1 end on the yellow plug
you might be able to use the cable on the other remote controller- as it has a 3 pin plug inside the controller- if its got 1
