Results 1 to 3 of 3
Thread: Hot Gas Bypass System
-
17-03-2006, 08:05 AM #1
Hot Gas Bypass System
hi chaps,anyone got a basic drawing not a doogle of a system layout, i know how it all works but need to submit a drawing for spec purposes,were doing some close control cabinets using 1,1/2hp condensing sets r404a,just need to show the pipework/valves etc layout,thanks.
-
17-03-2006, 04:13 PM #2
Re: Hot Gas Bypass System
Hi OGB,
Have a look at this pdf file from Sporlan, it's got pretty colours as well as a hot gas bypass.
http://www.sporlan.com/5-158.pdfBrian - Newton Abbot, Devon, UK
Retired March 2015
-
17-03-2006, 05:39 PM #3
Re: Hot Gas Bypass System
thats the one brian,thanks.
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
System Burn Out Troubleshooting
By altaf22m in forum Technical DiscussionsReplies: 13Last Post: 07-05-2010, 09:24 AM -
Burn out System, Clean up procedure. & Troubleshooting.
By altaf22m in forum CommercialReplies: 19Last Post: 15-04-2008, 07:03 PM -
What is System balance?
By shogun7 in forum Technical SpeculationsReplies: 56Last Post: 19-01-2006, 09:47 AM -
Refrigeration system proposal; comments please.
By DaBit in forum Technical SpeculationsReplies: 13Last Post: 01-01-2003, 03:42 PM