Results 1 to 7 of 7
Thread: Oil pressure problem solution
-
Oil pressure problem solution
hmm, looks like tha last one didnt go through... but fear not
Now you have a one time opportunity to get your hands on the solution to all your oil pressure problems!
It might look like a regular vice, but nay, this is but the lates in the field of safe guard bypass, no more thawed merchandise, no more sour milk, no more getting up late at night when the alarm central pages your cell... JUST because the compressor stopped on low oilpressure....
This baby will keep your compressor running til the fat lady sings...
(Free jumper for the HP/LP guard with all orders of more than three)
-Cheers-
Tycho
-
20-03-2006, 09:37 PM #2
Re: Oil pressure problem solution
Excellent description.
I have heard a small pocket screw driver provides the same level of protection.
-
20-03-2006, 09:52 PM #3
Re: Oil pressure problem solution
All those boring digital inputs...
Last edited by NoNickName; 21-03-2008 at 03:22 PM.
-
Re: Oil pressure problem solution
Ah, but the screw drivers might shake loose over time... once this baby is on.. it's ON
Could I interest you in a piece if stainless filler rod... to jam the oil level switch in place?
-Cheers-
Tycho
-
21-03-2006, 02:46 AM #5
Re: Oil pressure problem solution
I have seen a lot of interesting methods to block safety switches, but yours provides one of the most permanent ways I have ever thought of.
Perhaps this is worthy of a patent or trademark to prevent other unscrupulous people from copying this well thought out design feature.
-
21-03-2006, 08:32 PM #6
Re: Oil pressure problem solution
Is it patented?
If I use this idea who do I pay royalties to?
PaulaLast edited by Paulajayne; 21-03-2006 at 08:37 PM.
-
Re: Oil pressure problem solution
Originally Posted by NoNickName
Had a nice one when I arrived onboard and went to the compressor room before the chief, found the inc.cap solenoid on a screw compressor connected to an extensioncord.
when the chief entered to see me poking at his arrangement he said and I quote "Damn, I were supposed to fix those before you arrived"
His problem... LP-Cheers-
Tycho
Similar Threads
-
Liquid Overfeed Systems
By US Iceman in forum NH3Replies: 151Last Post: 08-03-2007, 05:34 AM -
water pressure problem
By Renato RR in forum Technical SpeculationsReplies: 3Last Post: 13-02-2006, 07:54 AM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM -
oil pressure problems on air dryer
By edge in forum Trouble ShootingReplies: 1Last Post: 16-07-2002, 02:10 PM