Results 1 to 5 of 5
Thread: R404a
-
20-03-2014, 03:15 PM #1
R404a
hello everyone
Im usually install cold room using R404a refrigerant but i haven't document related pressure and temperature R404a. Hope everyone to help!
Thanks,
P1070201.jpgP1070303.jpg
-
20-03-2014, 03:26 PM #2
Re: R404a
..
http://www.refrigerants.com/pics/ptchart.pdf
http://www.watco.com.mx/HTCPressureTemperatureChart.pdf
http://www.koolantkoolers.com/Portal...RE%20CHART.pdf
http://www.gas2010.com/pdfs/r404_pressure_temp.pdf
That should keep you goining for a while.
Regards
Rob
... ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
20-03-2014, 03:35 PM #3
Re: R404a
Thank Rob White
regards,
-
21-03-2014, 08:38 AM #4
Re: R404a
Just curious....On your second picture, are these condensing units mounted far enough away from the wall for adequate air flow? And..your HP/LP switch could be located on the base plate as vibration up high, as you have it currently on the plastic electrical box, may cause premature mechanical failure.
Thanks for posting pictures.Last edited by mikeref; 21-03-2014 at 08:43 AM.
To the optimist, the glass is half full. To the pessimist, the glass is half empty.
-
08-09-2014, 04:52 AM #5
Re: R404a
if you have smart phone
you can down load an app
search : KoolApp - ref. slider
this app was produce from Danfoss