Results 1 to 5 of 5
-
23-02-2014, 10:02 PM #1
Hanwest L5 controller upgrade to L62
New to here and thinking of upgrading the controller and relay board of our ducted system from Hanwest L5 to Hanwest L62.
The documentation said that L62 is a 2 staged controller but our old compressor is only single stage. My question is can I still do this with L62 or I need to look for something else?
Thanks in advance
Breamo
-
24-02-2014, 12:54 AM #2
Re: Hanwest L5 controller upgrade to L62
Hi Breamo.
is the system a Bradway ducted ?
-
24-02-2014, 02:35 AM #3
Re: Hanwest L5 controller upgrade to L62
Hi Magoo,
it is a UniAire ducted.
-
24-02-2014, 04:38 AM #4
Re: Hanwest L5 controller upgrade to L62
Hi breamo.
thought it may have been a Bradway as they use the Hanwest controllers, fairly straight forward controllers if you read and understand paper work that comes with new controller.
-
24-02-2014, 04:53 AM #5
Re: Hanwest L5 controller upgrade to L62
Thanks Magoo. OK I will give it a go as the L62 control unit look a lot better than our L5.