Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2009
    Location
    Scotland
    Age
    39
    Posts
    79
    Rep Power
    16

    Panasonic twin split



    Hi all, been to look at a Panasonic twin split. Condensing unit model CU-W43BBP8. Cassette model - CS-W24BB4P. It has a infra red remote.

    Condensing unit would not run, all fault lights were on on the outside board. After disconnecting the master units drain pump I got the condensing unit running in both heating and cooling however the slave unit fan will not run, it is getting no voltage whatsoever (slave unit has led 1 on green and led 2 flashing red constantly). Drain pump functions normally on this unit.

    The master units drain pump is constantly getting 70 volts both with the float switch open circuit or shorted out (the pump runs correctly when given an independent supply). Green light on only on this board. All fault lights are still on on condensing unit.

    Any ideas?



  2. #2
    Join Date
    Oct 2013
    Location
    Turkey
    Age
    33
    Posts
    15
    Rep Power
    0

    Re: Panasonic twin split

    hi, you can see this blog panasonic ac error codes. http://airconditionererrorcodes.blog...ult-codes.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •