Results 1 to 10 of 10
Thread: Annie A-3
-
07-01-2014, 07:11 PM #1
Annie A-3
I have one and still use it.
But I would like to get a copy of the manual and schematics.
This is the imperial version made in Chicago in a plastic molded case.
Does anyone have it to share?
-
08-01-2014, 08:49 AM #2
Re: Annie A-3
If you use the Advanced Search function it will bring up a few posts relating to ANNIE
-
08-01-2014, 12:48 PM #3
Re: Annie A-3
Perhaps before you give advice you should checks its validity. I did several advanced searches. All I found were other replies like yours or threads that were Hijacked by the a-2 and a-12. NONE posted a solution to my problem.
-
08-01-2014, 07:31 PM #4
-
09-01-2014, 03:37 PM #5
Re: Annie A-3
The point is that your response is not helpful.
And it would not have been weather I stated that i searched or not.
Your advice was wrong..... Had you taking the time to search you would have known that there was no answer to be had......
Having said that, is there anyone that can help?
-
09-01-2014, 04:45 PM #6
Re: Annie A-3
I think that my advice WAS quite valid. If you search the forum you WILL find a few posts relating to ANNIE.
Maybe not the one you are looking for but that is for you and only you to decide.
Unhelpful comments like the ones you are posting will not get you very far on this friendly forum.
-
09-01-2014, 06:15 PM #7
-
09-01-2014, 07:17 PM #8
Re: Annie A-3
Can't give you rep Grizzly. ..but thanks for the support
-
10-01-2014, 11:29 AM #9
Re: Annie A-3
Taken care of Frank.
Selkov, have you tried emailing the manufacturer to ask them? That seems the simplest route to me.
-
15-01-2014, 03:43 PM #10
Re: Annie A-3
Try this my friend hope it helps
Lastguest
Annie A12_0001.jpg