Results 1 to 9 of 9
Thread: The capacity doesn't change
-
01-01-2014, 10:48 AM #1
The capacity doesn't change
Hi,
I have a problem in sabroe compressor in capacity, the capacity doesn't change, it's zero
How i can solve it?
Please help me and thank.
-
01-01-2014, 11:38 AM #2
Re: The capacity doesn't change
OK, Sabroe reciprocating or screw, you know more?, model, CMO, SMC, SAB, SAB-Frick ......
And Happy New year, Josef.
-
01-01-2014, 12:09 PM #3
Re: The capacity doesn't change
Sorry ,it type is screw and it model is(Xjf120l0962ff)
And alot of happy for you and other guys.
-
01-01-2014, 12:29 PM #4
Re: The capacity doesn't change
Thanks for the information, have you checked the coil?, What oil pressure, discharge pressure, the number of operating hours, the oil changed? When it all well, will be a problem in the pressure relief valve to regulate, you know what I'm writing?
-
01-01-2014, 12:39 PM #5
Re: The capacity doesn't change
Yes,sair i will make cheack and come back.
-
01-01-2014, 01:10 PM #6
Re: The capacity doesn't change
Every thing you tolled me is good,
But maybe the problem at coil, what is your ordered?
-
01-01-2014, 01:13 PM #7
Re: The capacity doesn't change
Please your email.
-
01-01-2014, 08:20 PM #8
Re: The capacity doesn't change
If load solenoid coil is damaged, swap unload coil to load coil to see if it works.
You can also manually push directional control valve center with a small punch or screwdriver.
Try both ends as it may be jammed.
-
03-01-2014, 08:22 AM #9
Re: The capacity doesn't change
What is the controller? Unisab? Quantum?. Does it really not load/unload or is it not reading at the panel? Could be a faulty pot/transmitter.
Current draw will give it away if it is loading or not.