Results 1 to 4 of 4
Thread: Milk processing
-
10-12-2013, 03:28 PM #1
regular poster
I am just settling in to : RE
- Join Date
- Mar 2010
- Location
- Bangladesh
- Age
- 40
- Posts
- 151
- Rep Power
- 15
Milk processing
How much cooling load (TR) is required to cool 3000 Ltr of milk from 30 deg C to 3 deg C in 8 hrs?
We want to use SS jacketed tank with DX cooling coil.
-
10-12-2013, 04:54 PM #2
VIP Poster
- Join Date
- Aug 2006
- Location
- england
- Age
- 50
- Posts
- 3,856
- Rep Power
- 46
Re: Milk processing
8 hours is too slow if you are filling the tank in one go, the milk will spoil.
How are you going to use the tank? (On a farm with two or three milkings a day, in a factory etc with one filling, at a depot with farmers bringing milk in small quantities over the day)
Think they duty is about 3.1 tons but i would not have too much faith in that figure as i just used info found via google etc.Mostly found in Oxfordshire, UK :)
-
10-12-2013, 05:57 PM #3
Moderator
Site Moderator : and general nice guy
- Join Date
- Sep 2003
- Location
- ISRAEL
- Age
- 72
- Posts
- 4,248
- Rep Power
- 46
Re: Milk processing
try here
www.mgt.co.il
-
11-12-2013, 07:04 AM #4
regular poster
- Join Date
- Jan 2007
- Location
- India
- Posts
- 65
- Rep Power
- 19
Re: Milk processing
It is coming around 3.35 TR . However 8Hrs pull down is too much. I have seen 5 hrs as a pull down time followed in Dairy plants
