Results 1 to 7 of 7
-
07-12-2013, 08:27 PM #1
i am new member and i want some help
hiiii all , i want to know why every one dosnt want to help me
that is because i am new member i want ur help for my big problem
electrical wiring diagram for unisab iii
-
07-12-2013, 08:42 PM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: i am new member and i want some help
Did you tried e-mailing your request to Sabroe customer Support?
http://www.sabroe.com/en/contact/
Marianne Lykke Christensen
Sales Coordinator
Responsible for the Sabroe brand
Tel: +45 87 36 75 19
Mail: marianne.lykke.christensen@jci.com
Last edited by nike123; 07-12-2013 at 08:45 PM.
-
Re: i am new member and i want some help
Send me your email and I'll send you a manual.
-
09-12-2013, 09:51 PM #4
Re: i am new member and i want some help
Hi, hamdyzakzook
Welcome to RE forums ....
It will be nice to introduce yourself here
http://www.refrigeration-engineer.co...p?72-New-to-RE
it is not nice to hijack another thread for your problems like you did here:
http://www.refrigeration-engineer.co...ht=#post289558
furthermore there is no delay to your request because you are a new member, but you post your request in wrong thread ...
and most important thing is ... we all, here on RE forums, are volunteers ... struggling for our daily bread on some-other working place to support our families ... thus we are not here all-day guard ... sometimes there are many days in between two visits to RE forums, because we are busy or have not a time ... thus you need to be patient, the same rule valid for me or any other RE member ... very simple, but in return you get much more then you expect, believe me ...
all help to our members is free of charge and I believe you would find a time to wait for free and right answer ...
Here on the RE forums you'll find a very nice people always willing to help, but that does not mean immediately as I try to explain above ... hope you'll accept my explanation
Anyhow, if you post your email address, our member passandscore will send manual you need ...
If you need something more, please, do not hesitate to ask.
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
09-12-2013, 11:55 PM #5
Re: i am new member and i want some help
hiii all ,,
thank u for the respect and kind manner of reply and i am very happy to be a member of this forum and i wish in some day i can give help or advise and about me ...
my name is hamdy from egypt ,my age is 33
and i am an electrical engineer work from 2005 and now i hope i can be refrigeration engineer mechanical &electrical
at end thanks for all
best regards
-
10-12-2013, 12:08 AM #6
Re: i am new member and i want some help
hiii passandscore ,
thank u very much and this is my email: eng.hamdyzakzook@yahoo.com
best regards,
-
10-12-2013, 12:10 AM #7
Re: i am new member and i want some help
hiiii josip ,
thank and i hope we will continue as friends
best regards,