Results 1 to 11 of 11
Thread: Sanyo Controller RCS
-
05-12-2013, 11:56 AM #1
Sanyo Controller RCS
Hi Guys,
I've got 7No. R407c splits currently group controlled on 1No. RCS-SH80TG that need dividing into two groups. (additional controller required)
I've been told that the RCS-SH80TG has been discontinued and that I can only use an RCS-KR1TG. (simplified)
Would anyone be able to help me out finding a spare SH80TG or long shot would anyone have one 'lying around'?
Thanks,
-
05-12-2013, 04:36 PM #2
Re: Sanyo Controller RCS
sanyo are now Panasonic give them a try
-
05-12-2013, 04:57 PM #3
-
05-12-2013, 09:00 PM #4
Re: Sanyo Controller RCS
Another option would be to fit a Toshiba controller, I'm fairly sure they are the same and speaks the same language.
-
05-12-2013, 09:05 PM #5
Re: Sanyo Controller RCS
i bought 1 off e bay- cost me 12.50 with postage- brand spanky new, boxed with destructions
-
06-12-2013, 06:28 AM #6
Re: Sanyo Controller RCS
I have used a tosh controller on sanyo
-
06-12-2013, 09:07 AM #7
Re: Sanyo Controller RCS
re using a Tosh controller do you mean the newer model (same as RBC-AMT32E) as this is a 2-wire whereas the older one I require is a 3-wire.
-
06-12-2013, 07:42 PM #8
Re: Sanyo Controller RCS
cant you buy a simplified controller and swap it with a standard controller in say the canteen or reception area?
-
10-12-2013, 09:53 PM #9
Re: Sanyo Controller RCS
This controller is a 3 series remote.which have 3 cables connected.3 series remotes are discontinued as you said.your best bet is eBay
all new sanyo( Panasonic ) gear is now 4 series
-
11-12-2013, 11:45 AM #10
Re: Sanyo Controller RCS
Thanks for the replies.
I can get the simplified controller, which would suit the room fine, but at a cost of around 5 times of say a standard remote!
-
24-01-2014, 12:07 PM #11
Re: Sanyo Controller RCS
Can the RCS-KR1TG simplified remote be used to group 2x splits in the same room?