Results 1 to 10 of 10
Thread: Dixell controller help
-
27-11-2013, 12:28 AM #1
Dixell controller help
I am working on a Linde multinor 1540/80 dual temp cabinet with a dixell controller and the cabinet keeps icing up once a month and I can't check defrost settings.
i changed the defrost probe and heaters are working but will only stay on defrost for 5min.
hopefully someone might info on these
-
27-11-2013, 12:41 AM #2
Re: Dixell controller help
-
27-11-2013, 01:09 AM #3
Re: Dixell controller help
Thanks install monkey but my controller looks different and tried all the regular controllers parameters but just can't get in to parameters. Mine is a display linked to a small pcb board
-
27-11-2013, 08:42 AM #4
Re: Dixell controller help
Try emerson.climate europes website then as they do dixell-
-
27-11-2013, 09:00 PM #5
Re: Dixell controller help
what model is it padraic? usually hold up (or down arrow, can never remember which) and set, displays first parameter, release and press and hold again, after a few seconds gives you all parameters.
Mostly found in the southern part of this green and pleasant land.
-
27-11-2013, 09:05 PM #6
Re: Dixell controller help
http://www.emersonclimate.com/europe..._XM669K_GB.pdf
is it this 1??
-
28-11-2013, 11:34 PM #7
Re: Dixell controller help
That looks like it allright but it just won't let me in no matter what I try.. CON will display and nothing else...?
-
03-12-2013, 08:32 PM #8
Re: Dixell controller help
Put an elliwell on it.
-
03-12-2013, 09:08 PM #9
Re: Dixell controller help
level 2 password 321
-
15-12-2013, 04:21 PM #10
Re: Dixell controller help
Should be set and down for 5/6 seconds then show pas enter 3 2 1 as pass code and your parameters will be accessible.
The last thing to leave an engineer is pride!!