Hi,
I have a problem with the condenser running for 134system dryer unit. It was punctured beyond repairs due to unknown problem. so I have installed a non standard condenser unit meant for r22 as i do not have a similar one. It was placed away from the original position and on ground level (original condenser was at 3feet height).
On starting the unit, we find compressor was running with high pressure and sub cooling is also very high about 25-30k. what could be the reason for this High pressure?

will the distance and reduction in height affect the Hp? If i can bring down the hp i can solve the other problems.
134a system

hp-225psi
condensing temp- 24c
inlet air temp-23-24c
outlet air - 29-30