Results 1 to 2 of 2
-
11-11-2013, 02:27 AM #1
Matching components in refrigeration system
Here are my specification calculated from software (theoretical conditions though)
Refrigerant : R22
Condensing Temp: 55 oC
Evaporating Temp: 5 oC
Heat Reject (in condenser) : 3.125 kW
Heat Absorbtion (in evap): 2.52 kW
Work (compressor) : 0.58 kW
Here are my questions
How can I choose compressor to meet the specifications. Compressor suppliers provide only kW -> If I choose 0.6 kW, will it be adequate? They also provide cooling load which does not equal to 2.52 kW. How can I be sure if it fits to the system? If it exceeds 2.52 kW, is it enough?
Thank you very much
-
11-11-2013, 02:48 AM #2
Re: Matching components in refrigeration system
sorry I post in the wrong group. Anyone could move it?