Results 1 to 5 of 5
-
08-11-2013, 01:59 PM #1
leibert hiross unit with hiromatic controller
hi friends i try to change act temperature on it. I scroll to pin and entered the pass code and then it changed to SET asking for another 3 digit password. Does any body know to change parameter on them or after entering password what to do. Thankyou
-
08-11-2013, 06:57 PM #2
Re: leibert hiross unit with hiromatic controller
theres 5 levels of passwords
level 4 is sensor calibration
level 0 is read only
level 2 service low level
level 5 service hi level
level 3 not used
all passwords are the same as the chiller passwords-got a hiromatic manual but doesnt say the passwords
-
08-11-2013, 07:22 PM #3
Re: leibert hiross unit with hiromatic controller
If I remember right, Hiross use carel controllers or carel is making the controllers for them .
-
08-11-2013, 10:16 PM #4
Re: leibert hiross unit with hiromatic controller
hi thankyou for input ,ive put password in and pressed enter, then next screen says set and after putting passwords in it it doesnt change, and i think im missing something or theres something else ive have to do
-
06-04-2014, 10:27 PM #5
Re: leibert hiross unit with hiromatic controller
Hello.
With a little of delay.
Pasword low level: 149
Pasword high level: 501