Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2013
    Location
    Lebanon
    Age
    35
    Posts
    2
    Rep Power
    0

    Interface betweeb DAIKIN VRV and Home Automation?



    Hi everybody,

    I m trying to integrate the Daikin VRV system to the home automation, I m using bticino with SCS protocol. Is there any interface between D3net and SCS? or D3net and KNX? I found Zennio that can convert between D3nt and KNX, but should be installed one interface for each A/C unit. I m looking for only one interface that can be installed between the SCS bus and D3net bus.

    Thanks a lot



  2. #2
    Join Date
    Oct 2007
    Location
    United States
    Posts
    213
    Rep Power
    17

    Re: Interface betweeb DAIKIN VRV and Home Automation?


  3. #3
    Join Date
    Oct 2013
    Location
    Lebanon
    Age
    35
    Posts
    2
    Rep Power
    0

    Re: Interface betweeb DAIKIN VRV and Home Automation?

    mchild. thank you very much for your reply.
    Yeah this may work, and I think I have to try it. I just found a tutorial that explain how to use coolmaster1000D betweeb bticino and Daikin:

    http://www.myopen-legrandgroup.com/c...CoolMaster.pdf

    this internface will convert Daikin protocol to Ethernet so will be able to communicate with the bticino switch. This may be a solution, but first I want to try searching for a direct interface between D3net and SCS protocol, if you know such interface or if it even exists.

  4. #4
    Join Date
    Oct 2007
    Location
    United States
    Posts
    213
    Rep Power
    17

    Re: Interface betweeb DAIKIN VRV and Home Automation?

    Did you look at the other products on the Coolautomation.com site? They have a number of products.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •