Hi RE

I have just recieved an compressor (SECOP BD1.4 VSD) for a project, and i noticed that the 3D drawing of the discharge line does not fit the actual compressors discharge line, we had already ordered some of the pipes that was to be used and therefor i wanted to know if I was able to bend the discharge line so that it would look more like the 3D model.

If we're not able to bend it, there will not be enough room for the discharge line.
I am fairly new to the whole refrigeration field and therefor lack the practical knowhow of what your able to do.

Best regards

Woot