Results 1 to 7 of 7
Thread: Kelvinator inverter no heat
Threaded View
-
11-09-2013, 10:18 AM #1
Kelvinator inverter no heat
Hello
Kelvinator KSV35 CRC inverter will not go to heat mode, to run through mode control on remote all other signals give an acknowledgement beep accept heat mode - the icon comes up on remote but will not go to heat mode = it appears to be a indoor board issue but would like to know if anyone has experienced this before, I have had it before but unit was under warranty to others and I didn't hear the outcome.
Any advice appreciated
Thanks