Hi, im a bit confused about the datasheets of the compressors. i have a datasheet for Danfoss BD350GH compressor which says it is tested according to some standard like
ASHRAE LBP
Condensing temp 54.5c
Ambient temp 32c
Suction gas temp 32c
Liquid temp 32c

The suction gas temp, is it the temperature that goes into the compressor?
And then when you have to choose a compressor according to capacity it is listed with respect to temp and rpm. the evap temp on this compressor ranges from -25c to 15c, according to the test condition it says that the evap temp is then superheated to the suction gas temp of 32c, is this correct?