Results 1 to 5 of 5
Thread: Start delay
-
15-08-2013, 01:06 PM #1
Start delay
Hi guys.I have problem with a Clint liquid chiller(CRA/K 906-p) that uses Danfoss controller.After I switch on the unit, the controller starts the 6 hours delay.I cannot start the unit only after the 6 hours.Does anybody know how I can adjust this time shorter? It is a big problem because if there is a blackout in the summer there will not be cooling for 6 hours. Thanks for any ideas
-
15-08-2013, 04:54 PM #2
Re: Start delay
Model of controller?
-
15-08-2013, 07:12 PM #3
Re: Start delay
MCX controller.It is all that I know about it.
-
15-08-2013, 08:05 PM #4
Re: Start delay
http://www.danfoss.com/North_America...Archived=False
Find your controller and change the required paraeter.
-
17-08-2013, 07:10 PM #5
Re: Start delay
Hi
as chemi stated this parameter ia accsesible via the local keypad!!
good luckTHE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!