Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Apr 2013
    Location
    England
    Posts
    41
    Rep Power
    0

    Finding temperature at Evaporator entrance

    Dear all,

    This is for a theoretical system, which is trying to represent an 'actual' vapour compression cycle.

    I have the pressure, temperature, enthalpy and entropy at stage four of a single stage cycle. Stage four is the stage where refrigerant leaves expansion valve and enters evaporator.

    Is it possible to find the temperature, T4? I know how to use saturation tables, but I think for the evaporator entrance they arn't accurate,, is there any other way of deriving this value? I would love to know.

    I have temps., press., entahlpys and entropys at all other stages of cycle so i assume there is some equation to get T4, in theory any way.
    Kind Regards

  2. #2
    Join Date
    Apr 2006
    Location
    UK
    Age
    55
    Posts
    1,920
    Rep Power
    29

    Re: Finding temperature at Evaporator entrance

    'in theory' the liquid entering the evap will be at suction pressure temp with the addition of any subcooling

    although when I carry out physical checks when I decide where my inlet probe should go

    I find someone keeps stealing my subcooling

    have been blaming mr flashy gassy but would require a Mad Fridgie or Install Monkey to find the culprit

    R's chillerman
    If the World did not Suck, We would all fall off !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •