Results 1 to 4 of 4
Thread: TK i-Box alarm codes
-
17-02-2006, 10:19 AM #1
TK i-Box alarm codes
Hi there.
Does anyone know how to get the full list of alarm codes out of i-Box.
rather than just a shutdown alarm.
Thanks
-
17-02-2006, 11:22 AM #2
Re: TK i-Box alarm codes
AFAIA you can only get shutdown codes from i-Box.... BUT you need to speak to the Telematics company that did the SDK work for your interface.
John.
-
22-02-2006, 07:17 AM #3
Re: TK i-Box alarm codes
Thanks John
The i-Box I believe just needs to be configured differently.
So that the telematics company can read the alarms.
Problem is not sure how to configure.
Thanks
-
22-02-2006, 10:39 AM #4
Re: TK i-Box alarm codes
The Telematics company who's kit it is interfacing with should have purchased an SDK, from this they would then develope their own interface and configure the i-Box accordingly.
Is this what has happened or has i-Box just been sourced 'off the shelf'
John.
Similar Threads
-
Panasonic Fault codes
By ronaldo9 in forum Air ConditioningReplies: 31Last Post: 20-02-2011, 08:57 PM -
Dunham Bush Chiller Alarm
By Regulator in forum Air ConditioningReplies: 11Last Post: 08-12-2010, 01:42 AM -
carrier fault codes
By richelli in forum Trouble ShootingReplies: 5Last Post: 18-06-2010, 07:35 AM -
voltage drop on relay
By Temprite in forum ElectricalReplies: 4Last Post: 30-01-2006, 07:55 PM -
Help on fridge door alarm project
By edwardgith in forum ElectricalReplies: 6Last Post: 05-10-2005, 11:40 PM