Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2013
    Location
    England
    Posts
    41
    Rep Power
    0

    Refrigeration Calculations



    Hello alo,

    Is it possible to find enthalpys and pressures at various stages around the vapour compression cycle after given the following info.? :

    For Compressor:
    Displacement 2.00 cm^3
    Maximum refrigerant charge 300g
    Free gas volume in compressor 870 cm^3

    Evaporating temperature -30 to 10 °C

    Max. condensing temperature continuous (short) 60 to 70 °C

    And the Refrigerant: R-134a

    I want a cycle based on a real one to perform calculations on to investigate the cycle's performance, once I have put numbers to performance I will carry out more calculations on optimizing the performance.

    So far I have used this info. to get the enthalpy value 1) going into compressor, 2) coming out into condenser, 3) exiting condenser into expansion device and 4) after exiting expansion device into evaporator. Obviously my results will be rough but they might be useful for estimating changes in the system, such as changes of temperatures and pressures around the system, am I right?

    I obtained the evap and condensing max temps from a data sheet of a BD35F Danfoss Compressor which i am using in my analysis.

    Muchly appreciate all your help



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: Refrigeration Calculations

    Brian - Newton Abbot, Devon, UK
    Retired March 2015

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •