Results 1 to 5 of 5
Threaded View
-
12-02-2006, 09:34 AM #1
Cu/Ni condenser,32 bar,9 kW for R410A/salted water
Hello,
for our new generation of swimming pool heat pumps, we need to switch over to the new refrigerant R410A, which means we need a pressure rating on the refrigerant side at least 32 bar (450 psig?).
At the same moment we need to use salted pool water on the secondary side.
Can anybody deliver any condenser 32 bar, 9 kW capable of handling salted water? (Cu/Ni, titanium coaxial possibly)
I am ready to send the calculation of a (plate) condenser that we need to replace.
Awaiting any suggestion.
with advance thanks
Martin Pekarek
info@vymeniky.cz
Similar Threads
-
Fact or Fiction
By david.findlay in forum FundamentalsReplies: 40Last Post: 09-03-2009, 06:19 PM -
pure water from air
By Lc_shi in forum New TechnologiesReplies: 32Last Post: 26-02-2009, 12:25 PM -
Cu/Ni condenser,32 bar,9 kW for R410A/salted water
By Vymeniky in forum Technical SpeculationsReplies: 1Last Post: 18-02-2006, 09:43 PM -
Comments on this please
By Robearbam in forum FundamentalsReplies: 8Last Post: 18-04-2005, 05:20 PM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM