Differences between inline, Axial and centrifugal Fan..

**anil130** · 28-05-2013, 04:19 PM

hi all..
could anybody tell me the differences between inline, Axial and centrifugal Fan, any supporting documents for these materials..

**kefah** · 28-05-2013, 07:42 PM

An axial flow fan moves its air along its axis. They are usually simple fans, impeller mounted on a motor shaft and contained in a circular casing for mounting directly into a run of ducting. Ideal for a low pressure, low temperature, low cost applications although special variations are available. A centrifugal fan takes the air in at its centre and turns through 90 degrees to discharge radially. The centrifugal fan is the ‘all singing all dancing’ fan as it can develop high pressures and in its different forms handle high temperatures, high dust burdens, be gas tight construction, fabricated in a wide range of materials etc.
and inline fans

**install monkey** · 28-05-2013, 08:15 PM

fan1.jpg this may help if its big enough to read

**Brian_UK** · 28-05-2013, 10:54 PM

If you want to know about fans download the bible of fans...

Woods Practical Guide to Fan Engineering.......from here
http://venttech.co.nz/download

**moideen** · 29-05-2013, 07:40 AM

Originally Posted by brian_uk

if you want to know about fans download the bible of fans...

Woods practical guide to fan engineering.......from here
http://venttech.co.nz/download

thanks brian,good link.

**anil130** · 06-06-2013, 03:34 PM

many many thanks for the info my dear friends..

Thread: Differences between inline, Axial and centrifugal Fan..

Thread Tools

Display

Differences between inline, Axial and centrifugal Fan..

Re: Differences between inline, Axial and centrifugal Fan..

Re: Differences between inline, Axial and centrifugal Fan..

Re: Differences between inline, Axial and centrifugal Fan..

Re: Differences between inline, Axial and centrifugal Fan..

Re: Differences between inline, Axial and centrifugal Fan..

Posting Permissions