Results 1 to 7 of 7
-
24-10-2013, 09:41 AM #1
Remanufactured Compressors/Scroll Compressor
HI All,
Please can you suggest any good manufacturer for scrolls/compressors?
Further to this if some one can shed more light on costings in comparison to new ones!
Thanks for your help!!
-
24-10-2013, 11:09 AM #2
Re: Remanufactured Compressors/Scroll Compressor
Why would you remanufacture a scroll in the UK?
All the thinking was it simply didn't make economic sense outside of the third world.
I have experience of remanufactured hermetic compressors - Oz knows better than the UK.
It's all bad, as in I've not yet seen one without major issues. Leaking casings being predominant, but also mechanical or electrical issues. I've even had one where we suspect the internals were basically a completely different size of compressor to what they were supposed to be.
-
24-10-2013, 12:12 PM #3
Re: Remanufactured Compressors/Scroll Compressor
As FreezerGeezer
Says they are not economical to refurb unless very large. It is more practical to replace with new. You don't always need to go original manufacturer either. We do pay a premium in UK for parts!! in comparison to other countries.I love the smell of Ammonia in the morning!
-
24-10-2013, 01:43 PM #4
Re: Remanufactured Compressors/Scroll Compressor
Thanks for the inputs !!!
I have just researched a little bit and have come across JE Hall which do it in UK. Has anyone used them?
-
24-10-2013, 04:56 PM #5
Re: Remanufactured Compressors/Scroll Compressor
.. ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
24-10-2013, 07:31 PM #6
Re: Remanufactured Compressors/Scroll Compressor
It depends on the make and model of compressor, some of the Prestcold ones for example rods and cranks are unavailable.
Mostly found in Oxfordshire, UK :)
-
24-10-2013, 09:07 PM #7
Re: Remanufactured Compressors/Scroll Compressor
Health and safety first..........unless I'm in a hurry.