Carel PCO2 / 03 controllers and others.

[Grizzly]

Hi Guys.
Can anyone help please?
The green terminal blocks (Shaped like a series of D's on their side) that plug into these controllers and come in in various block sizes.

Does anyone know if and where these can be purchased?
What they are actually called would be a start!
Thanks Grizzly

[hyperion]

You could try contacting Dave Parsons at Dunham Bush as they are/were agents for Carel. He may well be able to help you.

[chemi-cool]

http://www.i-acs.co.uk/store/index.p...cessories.html

[install monkey]

how many connections and how many plugs?? - might have a few in the van

[Silhouette]

They are called "BL" plugs!

[Grizzly]

how many connections and how many plugs?? - might have a few in the van

Thanks for your kind offer IM.
Another of our regular group has also said he may be able to help.
Thank you my friend!
Basically i have a Trane (Tracer) Controller without the BL Plugs (thanks silhouette).
Which i want to set up on a test board.
So that I can have a play at linking up to it.
I have not yet had chance to work out what I need.

I will let you both know asap, if that's OK?
Work is getting quite busy, which is good!
If you think I can reciprocate, just ask.
Grizzly

[Brian_UK]

RS carry them as well.

[Grizzly]

Thanks for the info Brian.
It would be rude not to thank you Chemi, for your interesting site you posted.
Grizzly

[stufus]

What one's are you after Grizzly I have a Carel UChiller PCO rolling around the back of the Van with all the plugs on it .You are more than welcome to them.
I'll end up chucking it out.
If you PM me I'll get them out in the Post Today, After all I owe you at least a couple of plugs at this stage.
Cheers
Stu

[Gibbo]

Grizzly

The green screw plugs are called Phoenix Plugs and as Brian has said stocked by RS.


Gibbo

[Grizzly]

Thanks Gibbo.
All helpful advise is gratefully received.
They seem to come in different sizes?
I don't mean the number of terminals, but the size of the D shape.
I am thinking of a climaventa chiller that I look at and seem to remember thinking at the time.
Those plugs look different from the usual?
Grizzly

[al]

Nice site Chemi!

Grizz, those connectors ship with Linde cabinets, i've a few if you need them

alec

[Grizzly]

Hi Alec.
And a big thank you for all the offers from the other guys.
It's noted and remembered and very much appreciated.
Al I need the following to have a full set.
(X* = number of terminals)
1 x2, 5 x3, 2 x4, 5 x5 and 6 x6.
I suspect I could get away with less?
Also speak to Stu, who has some pending!

Once again good Karma all round!
Steve.

[al]

No worries Grizz, i'll check the workshop tomorrow.

alec

[stufus]

No worries Grizz, i'll check the workshop tomorrow.

alec

Check the workshop tonight !!!
You've to on site for 8am, about an hour before I get there.HAHA
Cheers
Stu

[al]

Posted from the Oak i presume?

Grizz the stuff is on the way!

alec

[Grizzly]

Mutual respect my friend to you and Stu!
This is what the forum is all about.

Steve.